Everten: SPI Stereo Audio Board [Seibu Kaihatsu]
Fully assembled PCB kit. Adds RCA connectors to the Seibu SPI arcade board for line-level stereo audio, no soldering required. Connects to the stereo connector at CN1 with included wire harness. Mounts to the audio heat sink with the provided hardware. Requires the jumper at JP121 be in the stereo position on the Seibu SPI board.
The kit includes: 1 x stereo PCB, 1 x wire harness, 2 x 6mm x 6mm brass male-female threaded standoffs, 2 x 6mm mounting screws, 2 x 8mm thread-forming screws (colored heads)
This kit is compatible with Seibu SPI V2.0 and V2.1 boards. Please choose the wire harness type that matches your Seibu SPI version at checkout. The orange connector is JAE (V2.0 boards) and the beige connector is Hirose (V2.1 boards). It has not been tested with the single board variant of Seibu SPI games and is likely not compatible.
Please see the attached datasheet for compatibility, installation instructions, and other notes before ordering.