HAS Deluxe Power Supply Cover (Meanwell RT Series)

A 3D printed cover for the Mean Well RT series power supplies. It uses a custom PCB with an IEC C5 "cloverleaf" power inlet, a fuse, a switch, and a HAS compatible 6-pin JST-VH connector.

Compatible with RT-65A, RT-85 and RT-125A.

The set includes:
a 3D printed cover printed in black PLA+
a custom PCB with 2 oz copper layers
a 60 cm long HAS compatible 6-pin JST-VH power supply harness (2x16AWG for GND, 2x16AWG for +5V, 1x18AWG for -5V, 1x18AWG for +12V)
3 x fuses, one for each PSU variant (65W, 85W, 125W)
a pair of HEX screws
4 x rubber feet with adhesive
a dust cap

You will need your own IEC C5 cable. It is the same cable that is commonly used with laptop power bricks.

Cover Assembly Instructions HERE

NOTE: Power supply in photos for illustrative purposes only and not included with purchase.