HAS (Home Arcade System) Accessories
We stock the following accessories from HAS:
VIDEO ADAPTERS:
8-pin mini DIN to HD-15 Adapter
8 pin mini-DIN to SCART Adapter
CONTROLLER ADAPTERS
3P4P Adapter
Dual Sega Saturn to DB15 Controller Adapter
IGS PGM to CPS-2 3/4 Player Adapter (Red)
IGS PGM 3/4 Player DB15 Adapter (PCB)
CABLES:
CPS-1 Kick Harness
CPS-2 Kick Harness
ST-V Kick Harness
CPS-2 Player 3 and Player 4 Harness
Konami Player 3 and Player 4 Harness
PSU Harness
Descriptions of each product below:
8-pin mini-DIN to SCART Adapter
With this adapter, you can easily connect the HAS to SCART devices. This adapter requires an 8-pin mini-DIN to 8-pin mini-DIN cable (not included), pins of the cable must connect straight through end to end.
8-pin mini DIN to HD-15 Adapter
This cable makes it easy to connect the HAS to monitors or upscalers that use the HD-15/VGA connector as input. You just need a VGA cable to connect to the OSSC/RetroTINK4K/GBS8200, or a VGA to BNC cable to connect directly to PVM/BVM monitors.
This cable can help with the Taito F3, which won't work with the OSSC when connected via the SCART.
Specifications:
+5V on pin #9.
~15cm long.
Disclaimer: The cable outputs low-resolution RGBS video, it doesn't upscale and/or output RGBHV video.
3P4P Adapter
The 3P4P adapter lets you connect Player 3 and Player 4 via DB15 ports. It requires a USB type A to USB-C cable between the HAS V5.0 and the adapter.
Disclaimer: The module requires a dedicated harness for each PCB game. For example, to connect players 3 and 4 to the CPS-2, you need a CPS-2 Player 3 and Player 4 harness. This product does not include any harnesses or USB cables, these must be purchased separately.
Dual Sega Saturn to DB15 Controller Adapter
A Sega Saturn adapter for two players. It connects directly to the DB15 ports on the HAS V5.0 and all future RGB's Lab products with the DB15 ports. It uses OEM Sega Saturn controller ports and is compatible with official Sega Saturn controllers/arcade sticks, digital only.
The adapter has its own button remapping, rapid-fire and profiles functionality. It operates the same way as the "Legacy Mode" of the HAS V5.0. The difference is that the 7th press on the Saturn adapter is always the Start output and the 8th press is the Coin output.
The remapping/rapid-fire functionality can be toggled on/off. To disable/enable it, hold the Start button on the Player 1 Sega Saturn controller when you power on the HAS. This can be done just once and the adapter will remember your setting when you power it on the next time. It is shipped with the remapping disabled.
Disclaimer: The adapter does not work with the older HAS versions due to a different DB15 ports pitch.
IGS PGM 3/4 Player DB15 Adapter (Red)
This adapter plugs in directly to the IGS PGM and lets you connect Player 3 and Player 4 via DB15 ports. It works with passive controllers, but if your controllers require power, then you can easily provide power to the adapter using a USB type A cable.
IGS PGM to CPS-2 3/4 Player Adapter (PCB)
This adapter plugs in directly to the IGS PGM and allows you to use a CPS-2 dedicated 3/4 Player harness to connect Player 3 and 4.
CPS-1 Kick Harness
The CPS-1 kick harness is required for CPS-1 games that use more than 3 buttons.
Specifications:
Dedicated for the HAS or devices that also use the JST-XH 6 pin header.
~45cm long
24AWG wires
CPS-2 Kick Harness
The CPS-2 kick harness is required for CPS-2 games that use more than 3 buttons. Also compatible with the CPS-3.
Specifications:
Dedicated for the HAS or devices that also use the JST-XH 6 pin header
~25cm long
24AWG wires
ST-V Kick Harness
The ST-V kick harness is required for ST-V games that use more than 3 buttons.
Specifications:
Dedicated for the HAS or devices that also use the JST-XH 6 pin header
~45cm long
24AWG wires
CPS-2 Player 3 and Player 4 Harness
To be used with the HAS 3P4P module.
Specifications:
~30 cm long
22 AWG wires
Konami Player 3 and Player 4 Harness
To be used with the HAS 3P4P module.
Specifications:
~30 cm long
22 AWG wires
Compatible with the following titles:
Bucky O'Hare
Dark Adventure
G.I. Joe
Metamorphic Force
Simpsons
Sunset Riders
Teenage Mutant Ninja Turtles
Teenage Mutant Ninja Turtles II
X-Men
PSU Harness
PSU Harness with fork terminals for Arcade Power Supplies.
Specifications:
High quality cable with HAS 6-pin connector on one end and fork terminals on the other end to connect to a suitable arcade power supply
~45cm long
18AWG wires